⌁100% Australian Owned & Operated ▱FREE Shipping over $99* ▦120 Store Locations ♧1 Hour Click & Collect ♕Best Prices
🛒 $0.00 0

Ramset C101J (Chemset™ 101) 750ml Medium Duty Anchoring Injection Adhesive

$76.00

Buy Ramset C101J (Chemset™ 101) 750ml Medium Duty Anchoring Injection Adhesive On Sale At Sydney Tools AU. FREE Shipping Australia Wide When You Spend $99. We Have The Best Brands At The Best Prices Including Milwaukee, Makita, HiKoKi, DeWalt and More! Check Our Redemption Deals Online For The Best Tools & The Best Prices.

Description

Fast Cure, medium duty anchoring of threaded studs and reinforcing bar into solid concrete, stone, hollow brick and hollow concrete block.Versatile, multi-purpose two part polyester anchoring system. Fast cure for high productivity. Non-drip formula, ideal for overhead installation.Steel Columns and beams, seating, machinery, facade pins, handrails, gates, starter bars, bottom plate fixing
Features & Benefits:

  • Easy dispensing, even in cold weather
  • Sag resistant formula for horizontal holes and overhead application
  • Tap value to preserve contents between uses.

Key Features:

  • Fast Cure
  • Solid and hollow Substrates
  • Easy dispensing all year round

Includes:

  • Nozzles

Specifications:

Properties
Typical Value
AppearancePart A: Mauve part B: Green
Mixed: Green / Grey
Chemical Type
Polyester
Density1.55kg / Litre @ 20?CHardness> Shore D 80
Heat Distortion Temperature
Approx. 80?CCompressive Strength (ASTM C579-01)
20 MPaWorking time (min) @ 20?C
5 to 10
Loading Time @ 20?C 90 minute s
Min Installation Temp (?C) 0Max Installation Temp (?C) 43Min Service Temp (?C) -10Max Service Temp (?C) 80SubstratesSolid Concrete, Solid Stone (proof loading recommended),
Solid Brick, Hollow Concrete Block, Hollow Brick

TradeApplication
ConcreterStarter Bars
Buliding ContractorThreaded Studs, Starter Bars, Hollow Masonry Sleeves, Remedial Wall Ties
Civil ContractorStarter Bars Steel Fabricator Threaded Studs, Hollow Masonry Sleeves Balustrade Contractor Threaded Studs, Hollow Masonry Sleeves FormworkerStarter Bars
BricklayerStarter Bars, Remedial Wall Ties FitterThreaded Studs, Hollow Masonry Sleeves Seating Contractor
Threaded Studs Facade Contractor
Threaded Studs
Uses:

  • Machinery hold down
  • Structural steel connections
    • Raker angles
    • Column hold down
  • Seating
  • Hand rails
  • Fencing
  • Ballustrade posts
  • Starter bars
  • Timber and steel house frame bottom plates to comply with BCA and Wind Code
  • Close to edge applications
  • Safety barriers

Installation in solid

  • Drill hole to specified diameter and depth
  • Remove dust and debris by brushing and blowing 3 times each (if hole is wet or flooded, brush only remove water and slurry with wet / dry vacuum)
  • Screw mixing nozzle onto cartridge and dispense 2-3 trigger pulls of adhesive to waste until colour is green / grey with no streaks
  • Insert tip of Nozzle to bottom of the hole and dispense adhesive
  • Fill hole to about 2/3 full
  • Insert threated stud or reinforcing bar with rotating motion to release trapped air
  • Wait until adhesive has fully cured before loading
  • Clean up with acetone
  • Additional information

    Brand

    Ramset

    Model

    C101J

    Reviews

    There are no reviews yet.

    Be the first to review “Ramset C101J (Chemset™ 101) 750ml Medium Duty Anchoring Injection Adhesive”

    Your email address will not be published. Required fields are marked *