Panasonic EY78A1X57 14.4V-18V Li-Ion Dual Voltage Cordless Rotary Hammer Drill & Driver – Skin Only

Description

The Panasonic 14.4V/18V Dual Voltage Cordless Rotary Hammer Drill & Driver is lightweight and compact, yet powerful. It is easy and comfortable to hold and the dust proof design allows for continuous use. It offers 5 torque levels, which can be adjusted according to the hardness of the material or the type of material being fastened. LED light allows for greater visibility.

By combining the functions of SDS-Plus Rotary Hammer and Drill Driver in one compact unit, the EY78A1X57 offers power and versatility without having to change tools.  Designed for fast hammer drilling of anchor holes in concrete and masonry, it easily converts to standard drilling for steel and wood, or for driving screws using the five-stage torque clutch.  The innovative T-grip design results in a stable balance, allowing one-handed operation and working in tight spaces.  It also features a dust-proof switch for ultimate reliability.

Ideal for:

• Lighting equipment, conduit pipe and switch box installation

Features:

• Dual Function – Combining the functions of SDS-Plus Rotary Hammer and Drill Driver in one compact unit
• Air System Hammer – The rotary hammer drill & driver offers high speed concrete drilling using the air type cup pison method.
• Five Torque Levels – The torque levels can be adjusted according to the hardness of the material of the type of material being drilled, approximately from 1.5 to 5.4Nm (1.0N.m per stage, total 5 stage).
• Dual Voltage (14.4V or 18V
) – Offers powerful performance with either a 14.4V or 18V battery. A special dual voltage circuit detects the voltage of the attached battery pack and controls the current and voltage flows to the tool to ensure optimum performance.

• High speed concrete drilling by air type (Cup piston method) hammer
• Variable speed control / reversible

• Compact body
• Slow start switch for accurate drilling with a clean finish
• SDS-plus bit system up to 16mm diameter
• LED light to support work

• Dust and water resistant level IP56

Specifications:

• Voltage: Dual 14.4V or 18V
• Chuck Type / Drive: SDS-Plus
• Overheat Protection System: Yes
• Clutch Stages: 5 plus drill
• Clutch Torque: 1.5 – 5.4 (1.0 per stage)
• Speed – No Load (rpm):
  • 0 – 1,250rpm (High/Hard Mode) (Rotation only)
• Blows per Minute:
• 0 – 4,750bpm (High/Hard Mode) (Rotation with hammering)

• Electric Brake: Yes
• LED Light: Yes
• Product has an IP Protection Rating: IP56
• Dimension (L x W x H): 249mm x 264mm x 64mm
• Weight: 2.45kg

Warranty

• 3 Year Warranty Covered By Panasonic Australia