Description
The Pro3000F50-KIT provides clear and precise tracing of communication cabling. The probes innovative filter obstructs noise from external sources (i.e. power cables and lighting) when listening for a tone. The probes powerful speaker makes tracing cables through drywall easy. The Pro3000 toners patented SmartTone technology (with five different tones for exact pair identification) allows the technician to identify individual pairs. The tone generator is also capable of sending tone up to 10 miles (16 kilometers) on most cables. The angled-bed-of-nails clips allow easy access to individual wires, and the RJ-11 connector is ideal for use on telephone jacks.
Innovative filtered probe obstructs signal of 50 Hz external interferenceTone and trace wire on non-active networksSmartTone™ technology provides five distinct tones for exact pair identificationSends loud tone up to 16 kilometers (10 miles) on most cablesLoud probe speaker is audible in noisy locations
Features:
Filtered Probe:
- 50Hz filtered probe
- Innovative filtered probe obstructs signal of 50Hz external interference
- Switch between filtered and unfiltered modes with one button press
- Tone and trace wire on non-active networks
- Auto-off capability extends battery life
- Loud probe speaker is audible in noisy locations
- 9V alkaline battery powered
Analogue Tone Generator:
- SmartTone technology provides five distinct tones for exact pair identification
- Sends loud tone up to 10 miles (16 kilometers) on most cables
- Line cord features angled bed-of-nails clips and a rugged RJ-11 plug for direct access to phone and data jacks without adapters
- External switch allows selection of solid or alternating tone options, indicated with solid or flashing LEDs
- Continuity Testing
- Line polarity confirmation
Application:
- Test & Measurement
Specificiations:
Probe:
- User Interface: ON/OFF Button (Push 1 second to activate, Press to turn off, Auto-off after 5 minutes)
- Frequencies Filtered: 50 Hz and its harmonic frequencies
- Battery: 9V Alkaline
- Operating Temperature: -13 to 140°F (-20 to 60°C)
- Storage Temperature: -40 to 158°F (-40 to 70°C)
- Dimensions (L x W x H): 248.9mm x 40.6mm x 33 mm
Tone Generator:
- User Interface: Slide switch selects Continuity or Tone Mode, Push button switch selects SOLID, ALT, or OFF, Tone mode LED
Continuity/Polarity LED. - Solid Frequency: 1000 Hz nominal
- Alternating Frequency: 1000/1500 Hz nominal
- Over Voltage Protection: 60 Vdc in Toner/Polarity Mode
- Output Power in Tone Mode: 8 dbm into 600 ohms
- Output Voltage Level in Continuity Mode: 8 Vdc with fresh battery
- Battery: 9V Alkaline
- Operating Temperature: -4 to 140°F (-20 to 60°C)
- Storage Temperature: -40 to 158°F (-40 to 70°C)
- Dimensions (L x W x H): 68.58mm x 60.96mm x 35.56mm
Reviews
There are no reviews yet.