Fluke FLUKE-754 (3405771) Documenting Process Calibrator-HART

Description

The 754 is a power multifunction documenting calibrator that you can use to download procedures, lists, and instructions created with software; or upload data for printing, archiving, and analysis. The powerful built-in HART interface is capable of performing nearly all the day-to-day tasks you now perform with a separate communicator.

Features:

• Full-featured documenting process calibrator with HART communication for calibrating and troubleshooting HART instrumentation.
• Measures volts, mA,TDs, thermocouples, frequency, and ohms to test sensors, transmitters and more
• Sources/simulates volts, mA, thermocouples, RTDs, frequency, ohms, and pressure to calibrate transmitters
• Powers transmitters during test using loop supply with simultaneous mA measurement
• Handles fast pulsed RTD transmitters and PLCs, with pulses as short as 1 ms
• Measures/sources pressure using any of 29 Fluke 700Pxx Pressure Modules
• Creates and runs automated as-found/as-left procedures to satisfy quality programs or regulations, and records and documents results
• Holds up to a full week of downloaded procedures and calibration results
• Uses many features like autostep, custom units, user-entered values during test, one-point and two-point switch testing, square root DP flow testing, programmable measurement delay and more
• Provides easy-to-use multi-lingual interface
• Features a bright white dual display for reading both sourced and measured parameters simultaneously
• Includes rechargeable Li-Ion battery for 10 hour uninterrupted use
• Comes with three-year warranty and DPC/Track Sample software
• Offers compatibility with many asset management software packages

Specifications:

• Data log functions: 
  • Measure functions: Voltage, current, resistance, frequency, temperature, pressure
  • Reading rate: 1, 2, 5, 10, 20, 30, or 60 readings/minute
  • Maximum record length: 8000 readings (7980 for 30 or 60 readings/minute)
  • Ramp functions:
    • Source functions: Voltage, current, resistance, frequency, temperature
    • Rate: 4 steps/second
    • Trip detect: Continuity or voltage (continuity detection not available when sourcing current)
• Loop power function: 
• Voltage: Selectable, 26 V
• Accuracy: 10%, 18 V minimum at 22 mA
• Maximum current: 25 mA, short circuit protected
• Maximum input voltage: 50 V DC
• Step functions: 
  • Source functions: Voltage, current, resistance, frequency, temperature
  • Manual step: Selectable step, change with arrow buttons
  • Autostep: Fully programmable for function, start delay, stepvalue, time per step, repeat
• Agency approvals: CAN/CSA C22.2 No 1010.1-92, ASNI/ISA S82.01-1994, UL3111, and EN610-1:1993
• Batteries: Internal Battery Pack Li-ion: 7.2V,4400mAh, 30 Wh
• Battery life: >8 hours typical
• Battery replacement: Replace without opening calibrator; no tools required
• Side port connections:
  • Pressure module connector
  • USB Connector to interface to your PC
  • Digital instrument (HART) connector
  • Connection for optional battery charger/eliminator
• Data storage capacity: 1 week of calibration procedures results
• Dimensions (L x W x H): 245mm x 136mm x 63mm
• Weight: 1.2kg