Carbatec BS-345H 1100W 345mm (14″) Two Speed Band Saw

Description

This 14″ bandsaw features cast alloy wheels and a 1.5HP powerful motor. The large 100mm dust port means this 14″ bandsaw can be used with a workshop dust extractor without needing to reduce the hose size and air flow. The open stand allows for a dust extractor hose to run easily to this 14″ bandsaw from any direction, whereas with a closed or cabinet stand, there may need to be more bends to get it to the dust port. Bends in hoses cause the air flow to be reduced, ideally dust hoses should remain as straight as possible for as far as possible. This increases the air flow between the machine and the dust extractor unit helping to provide the efficient transport of wood chips and shavings. 

This bandsaw comes into its own with its two speed feature, allowing you to cut wood using the high speed setting and non-ferrous metals when the machine is on the lower speed. Versatility of this sort is not often found in equipment like this so it is a nice feature to have. 

While the slot on this table does not have a standard 3/4″ wide x 3/8″ deep mitre slot, the table is quite large. This allows for good material support, therefore giving the user a safe place to work. This extra table area also lends itself to using magnetic feather boards or other types of jigs providing a safer work environment.

Features:

• 1.5HP induction motor 
• Light weight alloy wheels 
• Large 4″ (100mm) dust port 
• Adjustable blade guides 
• Rip fence 
• Mitre gauge 
• 2 speeds – High speed for wood – Low speed for non-ferrous metal 
• Easy to assemble stand comes in the same box as the bandsaw
• Includes Blade: 5/8″ x 4TPI (16mm x 4TPI)

Specifications:

• Motor: 1100W (1.5HP) Induction, 10A plug
• Switch Type: Magnetic NVR
• Blade Guides: Ball Bearing with manual rise & fall
• Blade Length: 2490mm
• Blade Release: Standard Tension Release
• Depth of Cut: 200mm
• Dust Port: 1 x 100mm (4″)
• Minimum Blade Width: 3.2mm (1/8″)
• Maximum Blade Width: 19mm (3/4″)
• Maximum Rip Capacity: 345mm
• Positive Stops: 0° Adjustable
• Table Height: 1060mm
• Table Size: 550mm x 400mm
• Table Tilt: -5° / +50°
• Wheel Diameter: 350mm
• Wheel Type: Cast Alloy
• Dimensions (L x W x H): 740mm x 580mm x 1740mm
• Weight: 95kg

Warranty:

• 1 Year Warranty Covered By Carbatec